 
|
|
Reheating Furnace
Slabs transferred from the continuous casting
mill and slabbing mill enter the rolling process after
they are fully heated in the reheating furnace. A vertical
scale breaker (VSB) eliminates the thick scale formed
on the slab surface during hot rolling. |
|
|
Roughing Mill
In this stage, slabs with surface scale already removed
are made into rolling material with appropriate shape,
thickness, and width. The edger at the entry and exit
of the mill rolls the slabs in crosswise direction using
the automatic width control (AWC) system. |
|
|
Finishing Mill
Finishing mill adjusts the slab thickness
and width to specification. It also rolls the slabs at
a suitable finishing temperature so that smooth surface
and proper shape can be attained. The cutting-edge work
roll shift, pair cross mill, and on-line rolling grinder
(ORG) control the crown, improving both productivity and
quality. |
|
|
Run-Out Table &
Coiler
After the finishing mill, the strip passes through the
run-out table where it is then coiled. While passing through
the table, the strip is sprayed with water to cool it
down to a suitable coiling temperature. |
|
|
Recoiling Line
Inspections for surface defects, shape, and size specification
are conducted during this stage to enhance product shape,
mechanical properties, and surface roughness. |
;){kind=small}
;)
;)
;)
;)